Sub-micrometre focusing of intense 100†keV X-rays with multilayer reflective optics.

A high-flux sub-micrometre focusing system was constructed using multilayer focusing mirrors in Kirkpatrick-Baez geometry for 100 keV X-rays. The focusing mirror system had a wide bandwidth of 5% and a high peak reflectivity of 74%. Performance was evaluated at the undulator beamline BL05XU of SPring-8, which produced an intense 100 keV X-ray beam with a bandwidth of 1%. When the light source was focused directly in both vertical and horizontal directions, the beam size was measured to be 0.32 µm (V) × 5.3 µm (H) with a flux of 1 × 1012 photons s-1. However, when a limited horizontal slit was used to form a secondary source, the focusing beam size decreased to 0.25 µm (V) × 0.26 µm (H) with a flux of 6 × 1010 photons s-1. The 200 nm line and space patterns of a Siemens star chart made of tantalum were clearly resolved by the absorption contrast of the focused beam. This 100 keV focusing system is applicable to various fields of nondestructive analyses with sub-micrometre resolutions.

Comprehensive Application of XFEL Microcrystallography for Challenging Targets in Various Organic Compounds.

There is a growing demand for structure determination from small crystals, and the three-dimensional electron diffraction (3D ED) technique can be employed for this purpose. However, 3D ED has certain limitations related to the crystal thickness and data quality. We here present the application of serial X-ray crystallography (SX) with X-ray free electron lasers (XFELs) to small (a few µm or less) and thin (a few hundred nm or less) crystals of novel compounds dispersed on a substrate. For XFEL exposures, two-dimensional (2D) scanning of the substrate coupled with rotation enables highly efficient data collection. The recorded patterns can be successfully indexed using lattice parameters obtained through 3D ED. This approach is especially effective for challenging targets, including pharmaceuticals and organic materials that form preferentially oriented flat crystals in low-symmetry space groups. Some of these crystals have been difficult to solve or have yielded incomplete solutions using 3D ED. Our extensive analyses confirmed the superior quality of the SX data regardless of crystal orientations. Additionally, 2D scanning with XFEL pulses gives an overall distribution of the samples on the substrate, which can be useful for evaluating the properties of crystal grains and the quality of layered crystals. Therefore, this study demonstrates that XFEL crystallography has become a powerful tool for conducting structure studies of small crystals of organic compounds.

Oxygen-evolving photosystem II structures during S1-S2-S3 transitions.

Photosystem II (PSII) catalyses the oxidation of water through a four-step cycle of Si states (i = 0-4) at the Mn4CaO5 cluster1-3, during which an extra oxygen (O6) is incorporated at the S3 state to form a possible dioxygen4-7. Structural changes of the metal cluster and its environment during the S-state transitions have been studied on the microsecond timescale. Here we use pump-probe serial femtosecond crystallography to reveal the structural dynamics of PSII from nanoseconds to milliseconds after illumination with one flash (1F) or two flashes (2F). YZ, a tyrosine residue that connects the reaction centre P680 and the Mn4CaO5 cluster, showed structural changes on a nanosecond timescale, as did its surrounding amino acid residues and water molecules, reflecting the fast transfer of electrons and protons after flash illumination. Notably, one water molecule emerged in the vicinity of Glu189 of the D1 subunit of PSII (D1-E189), and was bound to the Ca2+ ion on a sub-microsecond timescale after 2F illumination. This water molecule disappeared later with the concomitant increase of O6, suggesting that it is the origin of O6. We also observed concerted movements of water molecules in the O1, O4 and Cl-1 channels and their surrounding amino acid residues to complete the sequence of electron transfer, proton release and substrate water delivery. These results provide crucial insights into the structural dynamics of PSII during S-state transitions as well as O-O bond formation.

High-precision finishing method for narrow-groove channel-cut crystal x-ray monochromator using plasma chemical vaporization machining with wire electrode.

A channel-cut crystal monochromator (CCM) is a popular and powerful device for producing monochromatic x-ray beams with extreme angular stability at a nano-radian level. Narrowing the groove width of CCMs has various benefits; for example, it is made possible to design more compact CCMs with an equivalent working energy range and to reduce the optical delay and the amount of beam shift, enhancing compatibility with various experimental techniques. An obstacle to the use of narrow-groove CCMs is the lack of a high-precision finishing method for the inner-wall reflecting surfaces, which imposes the distortion of x-ray wavefronts and spectral purity. We propose a new, damage-free surface-finishing method for silicon CCMs with a narrow groove of 1 mm or less with a localized etching technique using plasma generated with a wire electrode of 50 µm diameter under atmospheric pressure. Repeating plasma-on and plasma-off periods with a pulsed power supply, we reduce the concentration of reaction products through self-diffusion during the plasma-off periods and minimize the redeposition of the products on the processed surface that deteriorates the surface roughness. Under optimized conditions, we processed a CCM with a groove width of 1.2 mm, which has uniform reflection profiles and a nearly ideal reflectivity behavior for coherent monochromatic x rays.

In situ high-pressure pair distribution function measurement of liquid and glass by using 100 keV pink beam.

Understanding the pressure-induced structural changes in liquids and amorphous materials is fundamental in a wide range of scientific fields. However, experimental investigation of the structure of liquid and amorphous material under in situ high-pressure conditions is still limited due to the experimental difficulties. In particular, the range of the momentum transfer (Q) in the structure factor [S(Q)] measurement under high-pressure conditions has been limited at relatively low Q, which makes it difficult to conduct detailed structural analysis of liquid and amorphous material. Here, we show the in situ high-pressure pair distribution function measurement of liquid and glass by using the 100 keV pink beam. Structures of liquids and glasses are measured under in situ high-pressure conditions in the Paris-Edinburgh press by high-energy x-ray diffraction measurement using a double-slit collimation setup with a point detector. The experiment enables us to measure S(Q) of GeO2 and SiO2 glasses and liquid Ge at a wide range of Q up to 20-29 Å-1 under in situ high-pressure and high-temperature conditions, which is almost two times larger than that of the conventional high-pressure angle-dispersive x-ray diffraction measurement. The high-pressure experimental S(Q) precisely determined at a wide range of Q opens the way to investigate detailed structural features of liquids and amorphous materials under in situ high-pressure and high-temperature conditions, as well as ambient pressure study.

Pressure-induced reversal of Peierls-like distortions elicits the polyamorphic transition in GeTe and GeSe.

While polymorphism is prevalent in crystalline solids, polyamorphism draws increasing interest in various types of amorphous solids. Recent studies suggested that supercooling of liquid phase-change materials (PCMs) induces Peierls-like distortions in their local structures, underlying their liquid-liquid transitions before vitrification. However, the mechanism of how the vitrified phases undergo a possible polyamorphic transition remains elusive. Here, using high-energy synchrotron X-rays, we can access the precise pair distribution functions under high pressure and provide clear evidence that pressure can reverse the Peierls-like distortions, eliciting a polyamorphic transition in GeTe and GeSe. Combined with simulations based on machine-learned-neural-network potential, our structural analysis reveals a high-pressure state characterized by diminished Peierls-like distortion, greater coherence length, reduced compressibility, and a narrowing bandgap. Our finding underscores the crucial role of Peierls-like distortions in amorphous octahedral systems including PCMs. These distortions can be controlled through pressure and composition, offering potentials for designing properties in PCM-based devices.

Disentangling the evolution of electrons and holes in photoexcited ZnO nanoparticles.

The evolution of charge carriers in photoexcited room temperature ZnO nanoparticles in solution is investigated using ultrafast ultraviolet photoluminescence spectroscopy, ultrafast Zn K-edge absorption spectroscopy, and ab initio molecular dynamics (MD) simulations. The photoluminescence is excited at 4.66 eV, well above the band edge, and shows that electron cooling in the conduction band and exciton formation occur in <500 fs, in excellent agreement with theoretical predictions. The x-ray absorption measurements, obtained upon excitation close to the band edge at 3.49 eV, are sensitive to the migration and trapping of holes. They reveal that the 2 ps transient largely reproduces the previously reported transient obtained at 100 ps time delay in synchrotron studies. In addition, the x-ray absorption signal is found to rise in ∼1.4 ps, which we attribute to the diffusion of holes through the lattice prior to their trapping at singly charged oxygen vacancies. Indeed, the MD simulations show that impulsive trapping of holes induces an ultrafast expansion of the cage of Zn atoms in <200 fs, followed by an oscillatory response at a frequency of ∼100 cm-1, which corresponds to a phonon mode of the system involving the Zn sub-lattice.

Femtosecond Reduction of Atomic Scattering Factors Triggered by Intense X-Ray Pulse.

X-ray diffraction of silicon irradiated with tightly focused femtosecond x-ray pulses (photon energy, 11.5 keV; pulse duration, 6 fs) was measured at various x-ray intensities up to 4.6×10^{19} W/cm^{2}. The measurement reveals that the diffraction intensity is highly suppressed when the x-ray intensity reaches of the order of 10^{19} W/cm^{2}. With a dedicated simulation, we confirm that the observed reduction of the diffraction intensity can be attributed to the femtosecond change in individual atomic scattering factors due to the ultrafast creation of highly ionized atoms through photoionization, Auger decay, and subsequent collisional ionization. We anticipate that this ultrafast reduction of atomic scattering factor will be a basis for new x-ray nonlinear techniques, such as pulse shortening and contrast variation x-ray scattering.

Non-thermal structural transformation of diamond driven by x-rays.

Intense x-ray pulses can cause the non-thermal structural transformation of diamond. At the SACLA XFEL facility, pump x-ray pulses triggered this phase transition, and probe x-ray pulses produced diffraction patterns. Time delays were observed from 0 to 250 fs, and the x-ray dose varied from 0.9 to 8.0 eV/atom. The intensity of the (111), (220), and (311) diffraction peaks decreased with time, indicating a disordering of the crystal lattice. From a Debye-Waller analysis, the rms atomic displacements perpendicular to the (111) planes were observed to be significantly larger than those perpendicular to the (220) or (311) planes. At a long time delay of 33 ms, graphite (002) diffraction indicates that graphitization did occur above a threshold dose of 1.2 eV/atom. These experimental results are in qualitative agreement with XTANT+ simulations using a hybrid model based on density-functional tight-binding molecular dynamics.

Spectral-brightness optimization of an X-ray free-electron laser by machine-learning-based tuning.

A machine-learning-based beam optimizer has been implemented to maximize the spectral brightness of the X-ray free-electron laser (XFEL) pulses of SACLA. A new high-resolution single-shot inline spectrometer capable of resolving features of the order of a few electronvolts was employed to measure and evaluate XFEL pulse spectra. Compared with a simple pulse-energy-based optimization, the spectral width was narrowed by half and the spectral brightness was improved by a factor of 1.7. The optimizer significantly contributes to efficient machine tuning and improvement of XFEL performance at SACLA.

The emergence of super-resolution beyond the probe size in scanning 3DXRD microscopy.

The spatial resolution in scanning-based two-dimensional microscopy is normally limited by the size of the probe, thereby a smaller probe is a prerequisite for enhancing the spatial resolution. For three-dimensional microscopy that combines translation and rotation motions of a specimen, however, complex trajectories of the probe highly overlap in the specimen, which could change the postulate above. Here, the spatial resolution achieved in scanning three-dimensional X-ray diffraction (s3DXRD) microscopy is investigated. In this method, the most appropriate orientation of the pixel in the specimen coordinate is selected by comparing the completeness of diffraction peaks with theory. Therefore, the superposed area of the beam trajectory has a strong effect on the spatial resolution, in terms of the completeness of diffraction peaks. It was found that the highly superposed area by the incident X-rays, which has the highest completeness factor in the pixel of the specimen, is much smaller than the X-ray probe size, and that sub-pixel analysis by dividing a pixel into small pieces leads to drastic improvement of the spatial resolution in s3DXRD.

Transonic dislocation propagation in diamond.

The motion of line defects (dislocations) has been studied for more than 60 years, but the maximum speed at which they can move is unresolved. Recent models and atomistic simulations predict the existence of a limiting velocity of dislocation motion between the transonic and subsonic ranges at which the self-energy of dislocation diverges, though they do not deny the possibility of the transonic dislocations. We used femtosecond x-ray radiography to track ultrafast dislocation motion in shock-compressed single-crystal diamond. By visualizing stacking faults extending faster than the slowest sound wave speed of diamond, we show the evidence of partial dislocations at their leading edge moving transonically. Understanding the upper limit of dislocation mobility in crystals is essential to accurately model, predict, and control the mechanical properties of materials under extreme conditions.

Propagation-based phase-contrast imaging method for full-field X-ray microscopy using advanced Kirkpatrick-Baez mirrors.

We demonstrate a propagation-based phase-contrast imaging method for full-field X-ray microscopy based on advanced Kirkpatrick-Baez (AKB) mirrors to achieve high-contrast observations of weak phase objects and correct field curvature aberrations. Through a demonstration performed at SPring-8, the phase contrast of weak phase objects such as polystyrene spheres and chemically fixed cells was successfully observed with high sensitivity (∼0.03 rad). Furthermore, the field of view of the AKB mirrors was expanded to the full area of the obtained images (25 × 30 µm) by correcting the field curvature aberration using reconstructed complex wavefields.

X-ray free electron laser observation of ultrafast lattice behaviour under femtosecond laser-driven shock compression in iron.

Over the past century, understanding the nature of shock compression of condensed matter has been a major topic. About 20 years ago, a femtosecond laser emerged as a new shock-driver. Unlike conventional shock waves, a femtosecond laser-driven shock wave creates unique microstructures in materials. Therefore, the properties of this shock wave may be different from those of conventional shock waves. However, the lattice behaviour under femtosecond laser-driven shock compression has never been elucidated. Here we report the ultrafast lattice behaviour in iron shocked by direct irradiation of a femtosecond laser pulse, diagnosed using X-ray free electron laser diffraction. We found that the initial compression state caused by the femtosecond laser-driven shock wave is the same as that caused by conventional shock waves. We also found, for the first time experimentally, the temporal deviation of peaks of stress and strain waves predicted theoretically. Furthermore, the existence of a plastic wave peak between the stress and strain wave peaks is a new finding that has not been predicted even theoretically. Our findings will open up new avenues for designing novel materials that combine strength and toughness in a trade-off relationship.

BL09XU: an advanced hard X-ray photoelectron spectroscopy beamline of SPring-8.

The BL09XU beamline of SPring-8 has been reorganized into a beamline dedicated for hard X-ray photoelectron spectroscopy (HAXPES) to provide advanced capabilities with upgraded optical instruments. The beamline has two HAXPES analyzers to cover a wide range of applications. Two sets of double channel-cut crystal monochromators with the Si(220) and (311) reflections were installed to perform resonant HAXPES analyses with a total energy resolution of less than 300 meV over a wide energy range (4.9-12 keV) while achieving a fixed-exit condition. A double-crystal X-ray phase retarder using diamond crystals controls the polarization state with a high degree of polarization over 0.9 in the wide energy range 5.9-9.5 keV. Each HAXPES analyzer is equipped with a focusing mirror to provide a high-flux microbeam. The design and performance of the upgraded instruments are presented.

Two-dimensional Kß-Kα fluorescence spectrum by nonlinear resonant inelastic X-ray scattering.

High sensitivity of the Kß fluorescence spectrum to electronic state is widely used to investigate spin and oxidation state of first-row transition-metal compounds. However, the complex electronic structure results in overlapping spectral features, and the interpretation may be hampered by ambiguity in resolving the spectrum into components representing different electronic states. Here, we tackle this difficulty with a nonlinear resonant inelastic X-ray scattering (RIXS) scheme, where we leverage sequential two-photon absorption to realize an inverse process of the Kß emission, and measure the successive Kα emission. The nonlinear RIXS reveals two-dimensional (2D) Kß-Kα fluorescence spectrum of copper metal, leading to better understanding of the spectral feature. We isolate 3d-related satellite peaks in the 2D spectrum, and find good agreement with our multiplet ligand field calculation. Our work not only advances the fluorescence spectroscopy, but opens the door to extend RIXS into the nonlinear regime.

Ultrafast Subpicosecond Magnetization of a 2D Ferromagnet.

Strong spin-charge interactions in several ferromagnets are expected to lead to subpicosecond (sub-ps) magnetization of the magnetic materials through control of the carrier characteristics via electrical means, which is essential for ultrafast spin-based electronic devices. Thus far, ultrafast control of magnetization has been realized by optically pumping a large number of carriers into the d or f orbitals of a ferromagnet; however, it is extremely challenging to implement by electrical gating. This work demonstrates a new method for sub-ps magnetization manipulation called wavefunction engineering, in which only the spatial distribution (wavefunction) of s (or p) electrons is controlled and no change is required in the total carrier density. Using a ferromagnetic semiconductor (FMS) (In,Fe)As quantum well (QW), instant enhancement, as fast as 600 fs, of the magnetization is observed upon irradiating a femtosecond (fs) laser pulse. Theoretical analysis shows that the instant enhancement of the magnetization is induced when the 2D electron wavefunctions (WFs) in the FMS QW are rapidly moved by a photo-Dember electric field formed by an asymmetric distribution of the photocarriers. Because this WF engineering method can be equivalently implemented by applying a gate electric field, these results open a new way to realize ultrafast magnetic storage and spin-based information processing in present electronic systems.

Thermus thermophilus polyploid cells directly imaged by X-ray laser diffraction.

Thermus thermophilus is reportedly polyploid and carries four to five identical genome copies per cell, based on molecular biological experiments. To directly detect polyploidy in this bacterium, we performed live cell imaging by X-ray free-electron laser (XFEL) diffraction and observed its internal structures. The use of femtosecond XFEL pulses enables snapshots of live, undamaged cells. For successful XFEL imaging, we developed a bacterial culture method using a starch- and casein-rich medium that produces a predominance of rod-shaped cells shorter than the focused XFEL beam size, which is slightly smaller than 2 µm. When cultured in the developed medium, the length of T. thermophilus cells, which is typically ~4 µm, was less than half its usual length. We placed living cells in a micro-liquid enclosure array and successively exposed each enclosure to a single XFEL pulse. A cell image was successfully obtained by the coherent diffractive imaging technique with iterative phase retrieval calculations. The reconstructed cell image revealed five peaks, which are most likely to be nucleoids, arranged in a row in the polyploid cell without gaps. This study demonstrates that XFELs offer a novel approach for visualizing the internal nanostructures of living, micrometer-sized, polyploid bacterial cells.